Precast Socket

Experience the pinnacle of precast concrete lifting and fixing with our innovative Bolt Anchor Lifting Sockets. Crafted from durable materials including Q345, 20#, and Stainless Steel, these sockets are engineered for maximum performance and longevity. Our sockets are not just combined lifting solutions–they're a testament to engineering precision. Galvanized for enhanced rust resistance, our Bolt Anchor Lifting Sockets embody reliability in every facet. With advanced CNC machining centers optimizing production, we ensure efficiency without compromise. Quality is our cornerstone–each socket undergoes rigorous testing, boasting 3 times safety factors against pulling force.

Solid Rod Fixing Sockets with Crossbar adds a Crossbar based on Solid Rod Fixing Sockets. The role of the Crossbar is to transmit the force it bears to the entire precast concrete. We will use stainless steel and carbon steel to produce Solid Rod Fixing Sockets with Crossbars because these two materials have very good mechanical properties. Its production process is as follows: after the raw materials that have passed the physical and chemical property tests are cut, they are transported to the automatic finishing equipment by the conveyor belt and then enter the automatic punching machine to punch holes.

Flat End Fixing Sockets with Cross Pin is a high-strength steel rod added to the Flat End Fixing Sockets. The role of the steel rod is the same as that of the steel bar. Its production and quality inspection are equally strict. When you contact us, we will form a team to provide you with thoughtful service. After you place an order, they will become your exclusive service team to help you control the quality of the product and quantity of the goods, track the production progress of the order, and provide real-time feedback. The threads of Flat End Fixing Sockets with Cross Pin are RD and M, and the products that can be shipped to you have passed the test of the go-no-go gauge.

Solid Rod Fixing Sockets is the second usage of Solid Rod Sockets. It is made by using Solid Rod through blanking, punching, tapping, finishing, and surface treatment. The material of Solid Rod Fixing Sockets is Q345 / 20# / Stainless Steel. It will have stronger rust resistance after being galvanized. We have advanced CNC machining centers to improve the yield and production efficiency of orders. Our quality control center will test the Fixing performance of Solid Rod Fixing Sockets with 3 times safety equal to pulling force.

Flat End Fixing Sockets are made of 20#steel, Q345 steel, or stainless steel pipes through extrusion, necking, drilling, tapping, surface treatment, and other processes. They are approved for use only if they pass a rigorous testing process. Flat End Fixing Sockets are extruded flat plates with a hole at one end. Pass the rebar through this hole before pouring. In this way, the force of the Flat End Fixing Sockets can be transmitted to the entire precast concrete. Its thread specifications are M and RD, and they can only be put into use after passing the detection of the go-no-go gauge. HULK Metal's factory is not only ISO 9001 certified but also has advanced integrated production equipment, which can complete orders faster.

Flat End Fixing Sockets with Bent End is available in RD and M threads. Its production is made of Q345, 20#, or stainless steel through necking, extrusion, bending, tapping, surface treatment, and other processes. We will use more than 3 times the pull force of safety factors to test its performance. Use a go-no-go gauge to check thread tolerances. With ISO9001 certification, we have a stricter production process, and the quality of Flat End Fixing Sockets with Bent Ends will be more guaranteed. We have more advanced production equipment and an experienced production team, which can complete your order faster.

Flat end lifting sockets are a kind of precast concrete accessories that provide a force point for concrete block lifting. It is a threaded socket at one end, and the other end is pressed into a flat shape with a hole. A plastic cap is required on the threaded end to prevent concrete from pouring in. The flat ends need to be pre-embedded in concrete with the steel bars passing through the holes in it. Flat-end lifting sockets are available in RD and M threads. Its material is 20# Steel, Q345, or stainless steel.

Tubular Lifting Sockets are a kind of cylindrical Lifting Sockets. One end of it is RD or M thread, and there is a Cross hole (used to connect steel bars) at one end. A plastic cap will be used between the hole and the thread to prevent concrete from being poured into the threaded socket when pouring. We will use Q345 Steel, 20# steel, or stainless steel as the raw material of Tubular Lifting Sockets. The quality inspection will use the go-no-go gauge to test the thread quality and use the pulling force of 3 times safety factors to test the lifting performance.

Flat Plate Lifting Sockets is welding a steel plate at the bottom of Lifting Sockets. The end with the steel plate is buried in concrete, and the other end is lifted using lifting loops. It has three materials: Q345 steel, 20#steel, and Stainless steel, and the surface treatment generally adopts hot-dip galvanizing and electro-galvanizing. When we test the lifting performance of Flat Plate Lifting Sockets, we generally use 3 times the pulling force of safety factors. Advanced production equipment and an experienced production team allow us to complete your order faster.

Long Wavy Lifting Sockets are precast concrete accessories that are widely used in lifting sockets. Its main lifting index is 0.5 tons - 8 tons. Use the necking process to firmly fix one end of the socket on the steel bar. The sockets are made of Q235 steel, 20#steel, and stainless steel. The test of Lifting performance is to use 3 times the pulling force of safety factors. HULK Metal has a complete Long Wavy Lifting Sockets production service system.

The only difference between Short Wavy Lifting Sockets and Long Wavy Lifting Sockets is where the tail bars start to bend. Its head is also made of 20# steel, q345 steel, and stainless steel. The link method is extrusion. The Lifting test uses 3 times the pulling force of safety factors. The surface treatment of its head is galvanized or galvanized.

Combi Lifting Sockets are composed of two parts, one end is a sleeve with RD or M thread, and the other end is a high-strength alloy steel rod with a base. The two parts are linked by extrusion. We use Q345 steel, 20# steel, and stainless steel to produce Combi Lifting Sockets and use galvanized methods to increase anti-rust performance. During the testing process, we use a micrometer to test the length of the product, a go-no-go gauge to test the tolerance of the thread, a tensile tester to test the lifting performance, and a smoke tester to test the rust resistance of the product.