Fixing Magnets

Features of HULK Metal Precast Magnets:

• Design Principles of HULK Metal Fixing Magnets:

  The fixing magnet is a special tool used to fix precast concrete elements. It is made of high-strength magnets and solid metal materials, with stable suction and durability. The process of manufacturing fixing magnet requires experienced engineers and advanced production equipment. First, high-quality magnets and metal materials need to be selected, as well as precise dimensional measurement and design. The materials are then cut, stamped and welded using specialized processing equipment. Finally, strict quality inspection is conducted on the finished product to ensure that it meets relevant standards and requirements.
  

  
  

  You can get free samples to check whether they can meet the requirements.

  Get Free Samples
• The Composition Of HULK Metal Fixing Magnets:

  The Round fixing magnet,is made of Neodymium Magnet,steel armature and steelthread rod.The neodymium magnet is plated with NI-CU-NI treatment,the steelarmature is treated with Zinc coating,the thread rod is coated with black epoxy.These surface treatment could offer good anti corrosion protections for the bushingfixing magnets.

  You can get a solution with shorter order delivery times and guaranteed quality and quantity.

  Get Your Free Solution
• Installation of HULK Metal Fixing Magnets:

  The embedded socket-fixing magnet employs the highest-grade NdFeB magnets renowned for their exceptional magnetic properties. These magnets are meticulously plated with NiCuNi to ensure durability and resistance to corrosion. Additionally, the metal cup housing the magnet can be treated with color Zinc or alternative coatings for enhanced protection against corrosion. It is imperative that the contact surface of the magnet remains clean and flat to maintain optimal magnetic force; any deviation may result in reduced effectiveness. Notably, the maximum working temperature for embedded fixing magnets is 80 degrees Celsius, and precautions must be taken to avoid exposure to fire or excessive heat. Should higher operating temperatures be required, the utilization of superior-grade NdFeB magnets becomes necessary. Furthermore, customization of magnetic force and dimensions can be tailored to meet specific customer specifications.

  You can benefit from the comprehensive services of a dedicated client team.

  Contact Your Dedicated Service Team
• Maintenance of HULK Metal Fixing Magnets:

  (1) The platform for using the magnetic box should be kept clean and flat to prevent iron pins or concrete slurry from entering the inside of the magnetic box, 

  which will affect the flexibility of the switch. At the same time, it may cause the magnetic block to tilt and cannot be leveled for service. platform.

  
  

  (2) The suction surface of the magnetic box should be kept clean and leveled continuously. If it is not needed for a long time, the suction surface should be oiled and treated to prevent rust.

   You should always check whether the magnet can fit flatly into the platform and whether the switch is flexible and easy.

  
  

  (3) During the use of the magnetic box, avoid hitting or scratching it with iron tools, which may cause the iron can to deform or even damage the magnet, 

  so as not to affect the performance indicators. If you must use special tools, it is recommended to use a vulcanized rubber hammer to tap gently.

  
  

  (4) The magnetic force on the holding surface of the magnetic box is very strong. You should avoid getting close to instruments, 

  machinery and electronics and other components that are susceptible to magnetic damage. At the same time, do not get close to other iron materials. 

  Once they are attracted, they cannot be separated. . It is recommended to make special auxiliary tools to place the magnetic box and other magnetic fixing splints.

  
  

  You can leave a request and get a more suitable quotation.

  Get a Better Quotation